Capabilities

  • Miltonic’s CNC 3-axis vertical mill
    54″ x 16″ table
    40″ x 20″ x 26″ travel
  • Sharp vertical knee mill
    10″ x 51″ table w/Acu-Rite DRO
  • Sharp verthorz mill
    12″ x 51″ table w/Acu-Rite DRO
  • Colchester lathe
    18″ x 80″ Gap bed 28″ swing
    w/Acu-Rite DRO
  • Sharp 1440v lathe variable speed
    14″ x 40″ w/Acu-Rite DRO
  • (2) Sharp 1660v lathe variable speed 16″ x 60″ w/Acu-Rite DRO
  • Sharp 1230 radial arm drill
    12″ x 30″
  • Clausing drill press 6″ x 12″
  • Sharp vertical knee mill
    10″ x 51″ table w/Acu-Rite DRO
    2-axis CNC Millpwr.
  • (2) V-18 Hyd-Mech Band saws
    12″ x 22″
  • Iron worker 90 ton
    24″ shear
  • Punch Press 35 ton
  • Tumbler
  • Water Jet Cutting: Computer controlled cutting of complex part designs, up to 8″ material thickness. The cutting table is 6′ x 12′ for large arrays of parts. A program is used to ‘nest’ parts for the most effective use of raw material.
Shearing:

  • Accushear 1/4″ x 12′
  • Accushear 3/8″ x 12′

Rolling Capabilities:

  • 3′ Niagra 3 roll roller
  • 3/8″ x 12′ heller 4 roll hydraulic plate roller
  • 3/8″ x 6′ WDM 4 roll hydraulic plate roller
  • Head roller 8″ up to 70″ dia

Automated Welding:

  • Four corp 12′ seam welder w/500 amp miller welder
  • Orbital Tube Welders

S.S. Finishing Capabilities:

  • Dedicated finishing department
  • Polishing of Pipe ID’s is available on a scheduled basis
  • Belt Sanding/Finishing of S.S. plate & flat stock up to 36″ wide. Also, finishing of Square & Rectangular S.S. tubing.
  • Sand blasting
  • Wilton Centerless pipe polisher w/up to 8″ diameter capacity
  • Sweep polisher 72″ radius
  • Large area for fabricating customer processing equipment with over 48,000 sq. ft.
Breaking Capabilities:

  • Accupress 400 ton x 12′
  • Accupress 175 ton x 12′
  • Accupress 250 ton x 12′